tripplite



TRIPPLITE(8)                Network UPS Tools (NUT)               TRIPPLITE(8)




NAME

       tripplite - Driver for Tripp-Lite SmartPro UPS equipment


NOTE

       This  man  page  only  documents  the hardware-specific features of the
       tripplite driver.  For information about the core driver,  see  nutups-
       drv(8).



SUPPORTED HARDWARE

       This  driver  should  work on the SmartPro line, including the SMART700
       and SMART700SER.  It only supports  SmartPro  models  that  communicate
       using the serial port.



EXTRA ARGUMENTS

       This   driver   supports   the   following  optional  settings  in  the
       ups.conf(5):


       offdelay=num
              Time to wait before the UPS is turned off after the  kill  power
              command is sent.  The default value is 64 (in seconds).


       rebootdelay=num
              Set  the timer before the UPS is cycled after the reboot command
              is sent.  The default value is 64 (in seconds).


       startdelay=num
              Set the time that the UPS waits before it turns itself  back  on
              after a reboot command.  The default value is 60 (in seconds).



KNOWN ISSUES AND BUGS

       Battery  charge  information  may  not be correct for all UPSes.  It is
       tuned to be correct for a SMART700SER.  Other models  may  not  provide
       correct  information.  Information from the manufacturer would be help-
       ful.



AUTHORS

       Rickard   E.   (Rik)   Faith   <faith@alephnull.com>   Nicholas    Kain
       <nicholas@kain.us>



SEE ALSO

   The core driver:
       nutupsdrv(8)


   Internet resources:
       The NUT (Network UPS Tools) home page: http://www.networkupstools.org/



                                Sat Aug 21 2004                   TRIPPLITE(8)

Man(1) output converted with man2html