cdrdao



CDRDAO(1)                                                            CDRDAO(1)




NAME

       cdrdao - writes audio CD-Rs in disc-at-once mode


SYNOPSIS

       cdrdao   {show-toc|read-toc|read-cd|read-cddb|show-data|read-test|disk-
       info|msinfo|unlock|simulate|write|copy|blank}     [--device     device]
       [--source-device  device] [--driver driver-id] [--source-driver driver-
       id]   [--simulate]   [--speed   writing-speed]   [--blank-mode    mode]
       [--datafile  file]  [--read-raw]  [--read-subchan  mode] [--tao-source]
       [--tao-source-adjust link-blocks] [--fast-toc] [--buffers buffer-count]
       [--multi]   [--overburn]   [--eject]   [--swap]  [--session]  [--force]
       [--reload] [--keepimage] [--on-the-fly] [--paranoia-mode mode] [--with-
       cddb]  [--cddb-servers  server-list]  [--cddb-timeout timeout] [--cddb-
       directory directory] [--save] [-n] [-v verbose-level] toc-file


DESCRIPTION

       cdrdao creates audio and data CD-Rs in disk-at-once (DAO)  mode  driven
       by  a  description file called toc-file.  In DAO mode it is possible to
       create non standard track pre-gaps that have other lengths than 2  sec-
       onds  and  contain  nonzero  audio  data. This is for example useful to
       divide live recordings into tracks where 2 second gaps would be kind of
       irritating.

       Instead  of a toc-file a cue file (used by a famous DOS/Windows master-
       ing tool) may be used. See the CUE FILES section for more details.



COMMANDS

       The first argument must be one of the following commands:

       show-toc
              Print out a summary about what will be written to the CD-R.

       read-toc
              Analyze each track of the inserted CD and create a toc-file that
              can  be  used to make a more or less exact copy of the CD.  This
              command does not read out the audio or data tracks, use  read-cd
              for this purpose.

              You  can specify a filename for the data file via the --datafile
              option.

       read-cd
              Copies all tracks of the inserted CD to an image file  and  cre-
              ates  a  corresponding  toc-file.   The  name  of the image file
              defaults to "data.bin" if no --datafile option is given.

       read-cddb
              Tries to retrieve title and artist data from a CDDB  server  for
              the  CD represented by the given toc-file. The retrieved data is
              added as CD-TEXT data for language 0 to the  toc-file.  Existing
              CD-TEXT data for language 0 will be overwritten.

       show-data
              Print  out  all  samples that would be written to the CD-R. Each
              line contains the sample number (starting at 0) and the  decimal
              sample  value for the left and right channel. Useful to check if
              the byte order of audio files is correct.

       read-test
              Check if all data can be read from  the  audio  files  that  are
              defined in the toc-file.  This will also check the communication
              with the slave process that is responsible for writing the audio
              data to the CD-recorder. Mainly used for testing.

       disk-info
              Shows  information  about  the inserted CD-R. If the CD-R has an
              open session it will also print the start of the last  and  cur-
              rent  session  which is used by mkisofs to create an image for a
              second or higher session.

       msinfo Shows information required for creating multi session disks with
              mkisofs. The output is meant for processing by scripts.

       unlock Tries to unlock the recorder device after a failed write or sim-
              ulation run. If you cannot eject the CD after a cdrdao  run  try
              this command.

       blank  Blanks  a  CD-RW. The CD-RW is minimally blanked by default. Use
              option --blank-mode to select another blanking mode.   Sometimes
              the  blanking  speed  must  be manually reduced for a successful
              blanking operation. Use option --speed to select another  blank-
              ing speed.

       simulate
              Like   write  but  laser  stays  cold.  It  is  a  shortcut  for
              write--simulate.

       write  Write the CD-R according to the specifications in the  toc-file.

       copy   Performs  all  steps  to  copy  a  CD. The device containing the
              source CD must be specified with option --source-device and  the
              recorder  device  with option --device.  If only a single device
              is available the option --source-device must be omitted and cdr-
              dao  will prompt to insert the CD-R after an image of the source
              CD was created.

              The image file with name "cddata<pid>.bin" will  be  created  in
              the  current working directory if no --datafile option is given.
              The created image will be removed after it has been written.

              If option --on-the-fly is given no image file is created and the
              data  will  be  directly piped from the reading device to the CD
              recorder.




OPTIONS

       --device [prot:]bus,id,lun
              Sets the SCSI address of the CD-recorder in form of a bus/id/lun
              triple,  e.g. ’0,2,0’ for the logical unit 0 of SCSI device with
              ID 2 on bus 0. ATAPI devices can be specified by using the  pre-
              fix  ’ATAPI:’, e.g. ’ATAPI:0,0,0’. On some systems a device node
              may be specified directly, e.g.  ’/dev/sg0’  on  Linux  systems.
              Linux  2.6 users may also try the newer ATAPI interface with the
              ’ATA:’ prefix.

       --source-device [prot:]bus,id,lun
              Like above but used for the copy command to specify  the  source
              device.

       --driver driver-id:option-flags
              Force  usage  of  specified  driver instead of the automatically
              determined driver. Available driver IDs:
              cdd2600, plextor,  plextor-scan,  generic-mmc,  generic-mmc-raw,
              ricoh-mp6200,   yamaha-cdr10x,  teac-cdr55,  sony-cdu920,  sony-
              cdu948, taiyo-yuden, toshiba.
              Specifying an illegal driver ID will give a  list  of  available
              drivers.   Option  flags  may  be used to modify the behavior of
              some drivers. See README for details.

       --source-driver driver-id:option-flags
              Like above  but  used  for  the  device  specified  with  option
              --source-device.

       --speed value
              Set the writing speed to value.  Default is the highest possible
              speed.

       --blank-mode mode
              Sets the blanking mode. Available modes are  full  and  minimal.
              Please  consider that the data of minimally blanked disks may be
              easily recovered. Use the  full  blanking  mode  for  completely
              erasing all data. The default blanking mode is minimal.

       --datafile file
              Used  for  read-toc,read-cd and copy.  Set the default data file
              placed in the  toc-file  by  read-toc.Use-toindicateSTDIN.   For
              commands  read-cd  and copy it specifies the name of the created
              image file.

       --read-raw
              Only used for commands read-cd and read-toc.  All  data  sectors
              will  be written as 2352 byte blocks including the sector header
              and L-EC data to the image file. The track mode will be  set  to
              MODE1_RAW or MODE2_RAW in the created toc-file.

       --read-subchan mode
              Used by commands read-cd, read-toc and copy.  Specifies the type
              of sub-channel data that is extracted from  the  source  CD  and
              written  to  the  track  image  or copied to the destination CD.
              Mode may be rw for reading  packed  R-W  sub-channel  data  (de-
              interleaved  and error corrected) and rw_raw for reading raw R-W
              sub-channel data (not de-interleaved, not error corrected,  L-EC
              data included in the track image).  If this option is not speci-
              fied no sub-channel data will be extracted.

       --tao-source
              This option indicates to the commands read-toc and read-cd  that
              the  source  CD was written in TAO mode. It will be assumed that
              the pre-gap length between all tracks (except between two  audio
              tracks)  is  the  standard  150  blocks  plus the number of link
              blocks (usually 2). The number of link blocks can be  controlled
              with option --tao-source-adjust.

              Use  this option only if read-toc or read-cd give error messages
              in the transition areas between two  tracks.  If  you  use  this
              option  with pressed CDs or CDs written in DAO mode you will get
              wrong results.

       --tao-source-adjust link-blocks
              Specifies the number of link blocks for tracks  written  in  TAO
              mode.  This  option has only an effect if option --tao-source is
              given.

       --fast-toc
              Only used for command read-toc.  This option suppresses the pre-
              gap  length  and index mark extraction which speeds up the read-
              toc process. Standard 2 second pre-gaps (but no  silence!)  will
              be  placed  into  the toc-file. The resulting CD will sound like
              the source CD. Only the CD player’s display will behave slightly
              different in the transition area between two tracks.

              This  option  might help, too, if read-toc fails with your drive
              otherwise.


       --buffers buffer-count
              Specifies the number of buffers  that  are  allocated  to  avoid
              buffer  under  runs.   The  minimal buffer count is fixed to 10,
              default is 32 except on FreeBSD systems, on which default is 20.
              Each  buffer  holds  1  second  of  audio  data so that dividing
              buffer-count by the writing speed gives  the  maximum  time  for
              which reading of audio data may be stalled.

       --multi
              If this option is given the session will not be closed after the
              audio data is successfully written. It  is  possible  to  append
              another session on such disks, e.g. to create a CD-EXTRA.

       --overburn
              By  default cdrdao will not allow to write more data on a medium
              than specified by the current  medium.  This  option  allows  to
              ignore this condition.

       --eject
              Eject the CD-R after writing or write simulation.

       --swap Swap  the  byte  order  of  all samples that are send to the CD-
              recorder.

       --session session-nr
              Used for read-toc and  read-cd  to  specify  the  session  which
              should be processed on multi session CDs.

       --reload
              Indicates  that  the  tray  may be opened before writing without
              prompting the user to reset the disk status after  a  simulation
              run.

       --force
              Forces the execution of an operation that otherwise would not be
              performed.

       --paranoia-mode mode
              Sets the correction mode for digital  audio  extraction.  0:  No
              checking,  data  is  copied  directly from the drive. 1: Perform
              overlapped reading to avoid jitter. 2: Like  1  but  with  addi-
              tional  checks  of the read audio data. 3: Like 2 but with addi-
              tional scratch detection and repair.

              The extraction speed reduces from 0 to 3.

              Default is the full paranoia mode (3).

       --keepimage
              If a CD is copied with command copy this option will cause  that
              the created image is not removed after the copy process has fin-
              ished.

       --on-the-fly
              Perform CD copy on the fly without creating an image file.

       --with-cddb
              Enables the automatic fetching of CDDB data for use  as  CD-TEXT
              data for commands copy, read-toc and read-cd.

       --cddb-servers server-list
              Sets  space  or ’,’ separated list of CDDB servers used for com-
              mand read-cddb or for commands where the --with-cddb  option  is
              active.  A server entry may have the following forms:

       <server>
              Connect  to <server>, default cddbp port (888), use cddbp proto-
              col.

       <server>:<port>
              Connect to <server>, port <port>, use cddbp protocol.

       <server>:<cgi-bin-path>
              Connect to <server>, default http port (80), use http  protocol,
              url: <cgi-bin-path>.

       <server>:<port>:<cgi-bin-path>
              Connect  to <server>, port <port>, use http protocol, url: <cgi-
              bin-path>.

       <server>:<port>:<cgi-bin-path>:<proxy-server>
              Connect to <proxy-server>, default http port (80), use http pro-
              tocol, url: http://<server>:<port>/<cgi-bin-path>.

       <server>:<port>:<cgi-bin-path>:<proxy-server>:<proxy-port>
              Connect to <proxy-server>, port <proxy-port>, use http protocol,
              url: http://<server>:<port>/<cgi-bin-path>.

              The <cgi-bin-path> is usually "/~cddb/cddb.cgi".

              All servers of the server list will be tried in the given  order
              until a successful connection can be established. For http proxy
              servers the first successful connected http proxy server will be
              used  independent  of  the ability to connect to the target http
              server.

              Example: freedb.freedb.org:/~cddb/cddb.cgi

       --cddb-timeout timeout
              Sets the  timeout  in  seconds  used  for  connections  to  CDDB
              servers.

       --cddb-directory directory
              Specifies  the  local CDDB database directory where fetched CDDB
              records will be stored. If this option is not  given  a  fetched
              CDDB record will not be stored locally.

       --save Saves   some  of  the  current  options  to  the  settings  file
              "$HOME/.cdrdao". See section ’SETTINGS’ for more details.

       -n     Suppresses the 10 second pause before writing or simulating.

       -v verbose-level
              Sets verbose level. Levels > 2 are debug levels which produce  a
              lot of output.



TOC FILES

       The toc-file describes what data is written to the CD-R and allows con-
       trol over track/index positions, pre-gaps and sub-channel  information.
       It is a simple text file, use your favorite text editor to create it.

       A toc-file contains an optional header and a sequence of track specifi-
       cations. Comments starting with ’//’ reaching until end of line can  be
       placed anywhere.


   Header
       CATALOG "ddddddddddddd"
              Specifies the optional catalog number of the CD. The string must
              contain exactly 13 digits.

       The following flags specify the type of session that will  be  created.
       It is used to create the correct CD-TOC format and to check the consis-
       tency of the track modes for the  desired  session  type.  If  multiple
       flags are given the last one will take effect.

       CD_DA  The disc contains only audio tracks.

       CD_ROM The  disc contains just mode 1 tracks or mode 1 and audio tracks
              (mixed mode CD).

       CD_ROM_XA
              The disc contains mode 2 form 1 or mode 2 form 2  tracks.  Audio
              tracks are allowed, too. This type must be used if multi session
              disks are created (option --multi).

       CD_TEXT { ... }
              Defines global CD-TEXT data like the album title  and  the  used
              languages.   See the CD-TEXT section below for the syntax of the
              CD-TEXT block contents.

   Track Specification
       TRACK <track-mode> [<sub-channel-mode>]
              Starts a new track, the track number is incremented  by  1.  The
              length  of  a track must be at least 4 seconds. The block length
              of the input data depends on the <track-mode>: AUDIO: 2352 bytes
              (588  samples), MODE1: 2048 bytes, MODE1_RAW: 2352 bytes, MODE2:
              2336 bytes, MODE2_FORM1: 2048 bytes,  MODE2_FORM2:  2324  bytes,
              MODE2_FORM_MIX:  2336 bytes including the sub-header, MODE2_RAW:
              2352 bytes.  The <sub-channel-mode> is  optional.  If  given  it
              specifies  the  type  of  sub-channel  data for each sector. RW:
              packed R-W sub-channel data (96 bytes, L-EC data will be  gener-
              ated if required), RW_RAW: raw R-W sub-channel data (interleaved
              and L-EC data already calculated, 96 bytes). The block length is
              increased by the sub-channel data length if a <sub-channel-mode>
              is specified.  If the input data length is not a multiple of the
              block length  it will be padded with zeros.

       The following flags may follow the track start statement. They are used
       to set sub-channel information for the  current  track.  Each  flag  is
       optional.  If  not given the following defaults are used: copy not per-
       mitted, no pre emphasis, two channel audio, no ISRC code.

       [ NO ] COPY
              Sets or clears the copy permitted flag.

       [ NO ] PRE_EMPHASIS
              Sets or clears the pre emphasis flag (only for audio tracks).

       TWO_CHANNEL_AUDIO
              Indicates that track contains two channel audio data  (only  for
              audio tracks).

       FOUR_CHANNEL_AUDIO
              Indicates  that track contains four channel audio data (only for
              audio tracks).

       ISRC "CCOOOYYSSSSS"
              Sets ISRC code of track (only for audio tracks).
              C: country code (upper case letters or digits)
              O: owner code (upper case letters or digits)
              Y: year (digits)
              S: serial number (digits)

       An optional CD-TEXT block that defines the CD-TEXT data for this  track
       may follow. See the CD-TEXT section below for the syntax of the CD-TEXT
       block contents.

       CD_TEXT { ... }

       At least one of the following statements must  appear  to  specify  the
       data  for  the  current  track.  Lengths  and  start  positions  may be
       expressed in samples (1/44100 seconds) for audio tracks or in bytes for
       data  tracks. It is also possible to give the length in blocks with the
       MSF format ’MM:SS:FF’ specifying minutes, seconds and frames (0 <= ’FF’
       < 75) . A frame equals one block.

       If  more  than one statement is used the track will be composed by con-
       catenating the data in the specified order.

       SILENCE <length>
              Adds zero audio data of specified length to  the  current  audio
              track.  Useful to create silent pre-gaps.

       ZERO <length>
              Adds  zero  data  to data tracks. Must be used to define pre- or
              post-gaps between tracks of different mode.

       [ FILE | AUDIOFILE ] "<filename>" <start> [ <length> ]
              Adds the audio data of  specified  file  to  the  current  audio
              track.  It is possible to select a portion of an audio file with
              <start> and <length> which allows non destructive  cutting.  The
              first  sample of an audio file is addressed with <start> = 0. If
              <length> is omitted or set to 0  all  audio  data  from  <start>
              until the end of file is used.

              Audio files may have raw or WAVE format with 16 bits per sample,
              44.1 kHz sampling rate, stereo. Raw files must have  the  layout
              ’MSBLeft LSBLeft MSBRight LSBRight ...’ (big endian byte order).
              WAVE files are expected to have little endian  byte  order.  The
              option  --swap  reverses the expected byte order for all raw and
              WAVE files. Only filenames with a ".wav" ending are  treated  as
              WAVE  files,  all other names are assumed to be raw audio files.
              Use tools like sox(1) to convert other file formats to supported
              formats.

              Specifying  a "-" as filename causes data to be read from STDIN.
              Currently only raw files are supported from STDIN.

              If you are unsure about the byte order of your audio  files  try
              the  command  ’show-data’. If the byte order is correct you will
              see a sequence of increasing  or  decreasing  numbers  for  both
              channels.  Otherwise  numbers  are jumping between very high and
              low values - high volume static.

       DATAFILE "<filename>" [ <length> ]
              Adds data from given file to the current data track. If <length>
              is omitted the actual file length will be used.

       FIFO "<fifo path>" <length>
              Adds  data from specified FIFO path to the current audio or data
              track.  <length> must specify the amount of data  that  will  be
              read  from  the  FIFO.  The  value  is  always in terms of bytes
              (scalar value) or in terms of the block length (MSF value).

       START [ MM:SS:FF ]
              Defines the length of the pre-gap (position where index switches
              from  0  to  1).  If  the MSF value is omitted the current track
              length is used. If the current track length is not a multiple of
              the  block  length the pre-gap length will be rounded up to next
              block boundary.

              If no START statement is given the track will not  have  a  pre-
              gap.

       PREGAP MM:SS:FF
              This  is  an  alternate way to specify a pre-gap with zero audio
              data. It may appear before  the  first  SILENCE,  ZERO  or  FILE
              statement.  Either  PREGAP  or  START can be used within a track
              specification. It is equivalent to the sequence
                SILENCE MM:SS:FF
                START
              for audio tracks or
                ZERO MM:SS:FF
                START
              for data tracks.

       Nothing prevents  mixing  ’DATAFILE’/’ZERO’  and  ’AUDIOFILE’/’SILENCE’
       statements  within the same track. The results, however, are undefined.


       The end of a track specification may contain zero or more index  incre-
       ment statements:

       INDEX MM:SS:FF
              Increments  the index number at given position within the track.
              The first statement will increment from 1 to 2. The position  is
              relative  to the real track start, not counting an existing pre-
              gap.


   CD-TEXT Blocks
       A CD-TEXT block may be placed in the  global  section  to  define  data
       valid  for  the whole CD and in each track specification of a toc-file.
       The global section must define a language map that is  used  to  map  a
       language-number  to  country  codes. Up to 8 different languages can be
       defined:

       LANGUAGE_MAP { 0 : c1  1 : c2  ...  7 : c7 }
              The country code may be an integer value in the range 0..255  or
              one  of the following countries (the corresponding integer value
              is placed in braces behind the token): EN(9, English)
              It is just necessary to define a mapping for the used languages.

       If  no  mapping exists for a language-number the data for this language
       will be ignored.

       For each language a language block must exist that defines  the  actual
       data for a certain language.

       LANGUAGE  language-number  { cd-text-item cd-text-data cd-text-item cd-
       text-data ... }
              Defines  the  CD-TEXT items for given language-number which must
              be defined in the language map.


       The cd-text-data may be either a string enclosed by "  or  binary  data
       like
            { 0, 10, 255, ... }
       where each integer number must be in the range 0..255.
       The cd-text-item may be one of the following:

       TITLE  String data: Title of CD or track.

       PERFORMER
              String data.

       SONGWRITER
              String data.

       COMPOSER
              String data.

       ARRANGER
              String data.

       MESSAGE
              String data. Message to the user.

       DISC_ID
              String data: Should only appear in the global CD-TEXT block. The
              format is usually: XY12345

       GENRE  Mixture of binary data (genre code) and string data. Should only
              appear  in the global CD-TEXT block. Useful entries will be cre-
              ated by gcdmaster.

       TOC_INFO1
              Binary data: Optional table of contents 1. Should only appear in
              the global CD-TEXT block.

       TOC_INFO2
              Binary data: Optional table of contents 2. Should only appear in
              the global CD-TEXT block.

       UPC_EAN
              String data: This item should only appear in the global  CD-TEXT
              block.  Was  always  an  empty  string  on the CD-TEXT CDs I had
              access to.

       ISRC   String data: ISRC code of track. The format is usually:  CC-OOO-
              YY-SSSSS

       SIZE_INFO
              Binary  data: Contains summary about all CD-TEXT data and should
              only appear in the global CD-TEXT block. The data will be  auto-
              matically (re)created when the CD-TEXT data is written.

              If  one  of the CD-TEXT items TITLE, PERFORMER, SONGWRITER, COM-
              POSER, ARRANGER, ISRC is defined for at least on track or in the
              global  section  it  must  be  defined for all tracks and in the
              global section. If a DISC_ID item is defined in the global  sec-
              tion, an ISRC entry must be defined for each track.


   Examples
       Simple  track  without  pre-gap  with  all  audio  data  from WAVE file
       "data.wav":
            CD_DA
            TRACK AUDIO
            FILE "data.wav" 0

       Standard track with two second pre-gap, ISRC code and CD-TEXT:
            CD_DA
            CD_TEXT {
              LANGUAGE_MAP {
                0 : EN
              }

              LANGUAGE 0 {
                TITLE "CD Title"
                PERFORMER "Performer"
                DISC_ID "XY12345"
                UPC_EAN ""
              }
            }

            TRACK AUDIO
            ISRC "DEXXX9800001"
            CD_TEXT {
              LANGUAGE 0 {
                TITLE "Track Title"
                PERFORMER "Performer"
                ISRC "DE-XXX-98-00001"
              }
            }
            PREGAP 0:2:0
            FILE "data.wav" 0

       Track with 10 second  pre-gap  containing  audio  data  from  raw  file
       "data.cdr":
            CD_DA
            TRACK AUDIO
            FILE "data.cdr" 0
            START 0:10:0

       Composed  track with data from different files. Pre-gap data and length
       is taken from "pregapdata.wav". The  first  minute  of  "track.cdr"  is
       omitted  and two seconds silence are inserted at ’2:0:0’. Index will be
       incremented after 2 and 4 minutes past track start:
            CD_DA
            TRACK AUDIO
            FILE "pregapdata.wav" 0
            START
            FILE "track.cdr" 1:0:0 1:0:0
            SILENCE 0:2:0
            FILE "track.cdr" 2:0:0
            INDEX 2:0:0
            INDEX 4:0:0

       Mixed mode CD with a data track as first track followed  by  two  audio
       tracks.
            CD_ROM
            TRACK MODE1
            DATAFILE "data_1"
            ZERO 00:02:00 // post-gap

            TRACK AUDIO
            SILENCE 00:02:00 // pre-gap
            START
            FILE "data_2.wav" 0

            TRACK AUDIO
            FILE "data_3.wav" 0



CUE FILES

       Cue  files may be used wherever a toc-file is expected. The correspond-
       ing bin file is not taken from the FILE statement of  a  cue  file  but
       constructed  from  the cue file name by replacing ".cue" by ".bin". The
       cue file must have exactly one FILE statement.

       Currently, following track modes are supported: MODE1/2048, MODE1/2352,
       MODE2/2336,  MODE2/2352.  The  CATALOG, ISRC and POSTGAP statements are
       parsed but not evaluated, yet.



SETTINGS

       Some of the command line options can be stored as settings at following
       locations. The files will be read on startup of cdrdao in that order:

       1. /etc/cdrdao.conf

       2. /etc/defaults/cdrdao

       3. $HOME/.cdrdao


       Command  line options will overwrite the loaded settings.  The settings
       file contains name - value pairs separated by a  colon.  String  values
       should  be enclosed by ". The file is automatically written if the com-
       mand line option --save is used but it is also possible  to  modify  it
       manually. Following values are defined:

       write_device
              Device  used  for operations simulate, write, copy, blank, disk-
              info and unlock.  Corresponding option: --device

       write_driver
              Driver (including driver options) that is  used  for  operations
              simulate,    write,   copy,   blank,   disk-info   and   unlock.
              Corresponding option: --driver

       write_speed
              Specifies writing speed. Corresponding option: --speed

       write_buffers
              Specifies fifo buffers used for recording. Corresponding option:
              --buffers

       read_device
              Device  used  for operations read-toc, read-cd and copy.  Corre-
              sponding option: --device or --source-device

       read_driver
              Driver (including driver options) used for operations  read-toc,
              read-cd  and  copy.  Corresponding option: --driver or --source-
              driver

       read_paranoia_mode
              Paranoia mode used for operations read-cd and copy.  Correspond-
              ing option: --paranoia-mode

       cddb_server_list
              CDDB  server  list for read-cddb.  Corresponding option: --cddb-
              servers

       cddb_timeout
              CDDB connection timeout in seconds used  by  read-cddb.   Corre-
              sponding option: --cddb-timeout

       cddb_directory
              Local  directory where fetched CDDB records will be stored, used
              by read-cddb.  Corresponding option: --cddb-directory





BUGS

       If the program is terminated during the write/simulation  process  used
       IPC  resources  may not be released. Use ipcs(8) and ipcrm(8) to delete
       them.


AUTHOR

       Andreas Mueller mueller@daneb.ping.de


SEE ALSO

       gcdmaster(1), cdrecord(1), cdda2wav(1), cdparanoia(1), sox(1), ipcs(8),
       ipcrm(8)



                                  Oct 6, 2002                        CDRDAO(1)

Man(1) output converted with man2html