amidi



AMIDI(1)                                                              AMIDI(1)




NAME

       amidi - read from and write to ALSA RawMIDI ports



SYNOPSIS

       amidi [-p port] [-s file | -S data] [-r file] [-d] [-t seconds] [-a]



DESCRIPTION

       amidi  is a command-line utility which allows to receive and send SysEx
       (system exclusive) data from/to external MIDI  devices.   It  can  also
       send any other MIDI commands.

       amidi  handles  only files containing raw MIDI commands, without timing
       information.  amidi does not support Standard MIDI  (.mid)  files,  but
       aplaymidi(1) and arecordmidi(1) do.



OPTIONS

       Use  the  -h,  -V,  -l, or -L options to display information; or use at
       least one of the -s, -r, -S, or -d options to specify what data to send
       or receive.


       -h, --help
              Help: prints a list of options.


       -V, --version
              Prints the current version.


       -l, --list-devices
              Prints a list of all hardware MIDI ports.


       -L, --list-rawmidis
              Prints all RawMIDI definitions.  (used when debugging configura-
              tion files)


       -p, --port=name
              Sets the name of the ALSA RawMIDI port to use.  If this  is  not
              specified, amidi uses the default port defined in the configura-
              tion file (the default for this is port 0 on card 0,  which  may
              not exist).


       -s, --send=filename
              Sends  the contents of the specified file to the MIDI port.  The
              file must contain raw MIDI commands  (e.g.  a  .syx  file);  for
              Standard MIDI (.mid) files, use aplaymidi(1).


       -r, --receive=filename
              Writes data received from the MIDI port into the specified file.
              The file will contain raw MIDI  commands  (such  as  in  a  .syx
              file);  to  record  a  Standard  MIDI  (.mid) file, use arecord-
              midi(1).

              amidi will filter out any Active Sensing bytes (FEh), unless the
              -a option has been given.


       -S, --send-hex="..."
              Sends  the  bytes  specified  as hexadecimal numbers to the MIDI
              port.


       -d, --dump
              Prints data received from the MIDI port  as  hexadecimal  bytes.
              Active  Sensing  bytes  (FEh)  will  not be shown, unless the -a
              option has been given.

              This option is useful for debugging.


       -t, --timeout=seconds
              Stops receiving data when no data  has  been  received  for  the
              specified amount of time.

              If  this  option  has  not been given, you must press Ctrl+C (or
              kill amidi) to stop receiving data.


       -a, --active-sensing
              Does not ignore Active Sensing bytes (FEh) when saving or print-
              ing received MIDI commands.



EXAMPLES

       amidi -p hw:0 -s my_settings.syx
              will send the MIDI commands in my_settings.syx to port hw:0.


       amidi -S â€â€™F0 43 10 4C 00 00 7E 00 F7â€â€™
              sends an XG Reset to the default port.


       amidi -p hw:1,2 -S F0411042110C000000000074F7 -r dump.syx -t 1
              sends  a  “Parameter  Dump  Request”  to  a GS device, saves the
              received parameter data to the file dump.syx,  and  stops  after
              the  device  has  finished  sending  data (when no data has been
              received for one second).


       amidi -p virtual -d
              creates a virtual RawMIDI port and prints all data sent to  this
              port.



FILES

       /usr/share/alsa/alsa.conf default rawmidi definitions
       /etc/asound.conf system-wide rawmidi definitions
       ~/.asoundrc user specific rawmidi definitions



BUGS

       The  --list-devices option pretends that output and input ports are the
       same.



SEE ALSO

       aplaymidi(1)
       arecordmidi(1)



AUTHOR

       Clemens Ladisch <clemens@ladisch.de>



                                  15 Feb 2005                         AMIDI(1)

Man(1) output converted with man2html